Square Endmills
Steel
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
 |
E966 | 2 Flute End Mill | 0.05-6.00mm | Z2, 2d & 3d Cutting Length, 2 teeth to center Roughing and Finishing |
 |
|||
 |
E8311 | 2 Flute End Mill | 1.00-12.00mm | Z2, 3d & 5d Cutting Length, 1 Tooth over center Roughing and Finishing |
|
|||
 |
E968 | 3 Flute End Mill | 1.00-6.00mm | Z3, 3d & 5d Cutting Length, Roughing and Finishing | |
|||
 |
E967 | 4 Flute End Mill | 0.20-6.00mm | Z4, 2d, 3d & 5d Cutting Length, Roughing and Finishing |
|
|||
Stainless Steel
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
E966 | 2 Flute End Mill | 0.05-6.00mm | Z2, 2d & 3d Cutting Length, 2 teeth to center Roughing and Finishing |
|
|||
|
E8311 | 2 Flute End Mill | 1.00-12.00mm | Z2, 3d & 5d Cutting Length, 1 Tooth over center Roughing and Finishing |
|
|||
|
E968 | 3 Flute End Mill | 1.00-6.00mm | Z3, 3d & 5d Cutting Length, Roughing and Finishing | |
|||
|
E967 | 4 Flute End Mill | 0.20-6.00mm | Z4, 2d, 3d & 5d Cutting Length, Roughing and Finishing |
|
|||
Cast Iron
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
E966 | 2 Flute End Mill | 0.05-6.00mm | Z2, 2d & 3d Cutting Length, 2 teeth to center Roughing and Finishing |
|
|||
|
E8311 | 2 Flute End Mill | 1.00-12.00mm | Z2, 3d & 5d Cutting Length, 1 Tooth over center Roughing and Finishing |
|
|||
|
E968 | 3 Flute End Mill | 1.00-6.00mm | Z3, 3d & 5d Cutting Length, Roughing and Finishing | |
|||
|
E967 | 4 Flute End Mill | 0.20-6.00mm | Z4, 2d, 3d & 5d Cutting Length, Roughing and Finishing |
|
|||
Non-Ferrous Material
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
 |
E923 | 1 Flute End Mill | 0.10-6.00mm | Z1, Wider Flute Space | ||||
|
E8231 | 1 Flute End Mill Polished Flute | 0.10-12.00mm | Z1, Wider Flute Space, Polished Finish | ||||
|
E966 | 2 Flute End Mill | 0.05-6.00mm | Z2, 2d & 3d Cutting Length, 2 teeth to center Roughing and Finishing |
|
|||
|
E8311 | 2 Flute End Mill | 1.00-12.00mm | Z2, 3d & 5d Cutting Length, 1 Tooth over center Roughing and Finishing |
|
|||
|
E8381 | 2 Flute End Mill for Aluminium | 0.40-8.00mm | Z2, 2d & 3d Cutting Length, High Helix, Roughing and Finishing |
|
|||
|
E968 | 3 Flute End Mill | 1.00-6.00mm | Z3, 3d & 5d Cutting Length, Roughing and Finishing | |
|||
|
E967 | 4 Flute End Mill | 0.20-6.00mm | Z4, 2d, 3d & 5d Cutting Length, Roughing and Finishing |
|
|||
Super Alloys
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
E966 | 2 Flute End Mill | 0.05-6.00mm | Z2, 2d & 3d Cutting Length, 2 teeth to center Roughing and Finishing |
|
|||
|
E968 | 3 Flute End Mill | 1.00-6.00mm | Z3, 3d & 5d Cutting Length, Roughing and Finishing | |
|||
|
E967 | 4 Flute End Mill | 0.20-6.00mm | Z4, 2d, 3d & 5d Cutting Length, Roughing and Finishing |
|
|||
Square with Long Approach
| Product | Article | Description | Dia Range | Download PDF | ||||
|---|---|---|---|---|---|---|---|---|
 |
E8331 | 2 Flute Endmill with Undercut | 0.10-20.00mm | |
||||
 |
E7681 | 3 Flute Endmill with Undercut | 0.50-20.00mm | |
||||
 |
E8471 | 4 Flute Endmill with Undercut | 0.50-20.00mm | |
||||
Square with Taper
Steel
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
 |
E9501 | 2 Flute Tapered Endmill | 0.20-12.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
 |
E9511 | 4 Flute Tapered Endmill | 0.20-3.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
Stainless Steel
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
E9501 | 2 Flute Tapered Endmill | 0.20-12.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
|
E9511 | 4 Flute Tapered Endmill | 0.20-3.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
Cast Iron
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
E9501 | 2 Flute Tapered Endmill | 0.20-12.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
|
E9511 | 4 Flute Tapered Endmill | 0.20-3.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
Non-Ferrous Material
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
E9501 | 2 Flute Tapered Endmill | 0.20-12.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
|
E9511 | 4 Flute Tapered Endmill | 0.20-3.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
Corner Radius with Standard Length
| Product | Article | Description | Dia Range | Download PDF | ||||
|---|---|---|---|---|---|---|---|---|
 |
E8361 | 2 Flute Endmill with Corner Radius | 0.30-20.00mm | |
||||
 |
- | 3 Flute Endmill with Corner Radius | 0.50-20.00mm | |
||||
 |
E9371 | 4 Flute Endmill withCorner Radius | 0.50-20.00mm | |
||||
Ballnose with Standard Length
Steel
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
 |
B970 | 2 Flute Ballnose End Mill | 0.10-3.00mm | Z2, 2d, 4d & 6d Cutting Length, Roughing and Finishing |
|
|||
 |
B972 | 4 Flute Ballnose End Mill | 0.10-3.00mm | Z4, 2d, 4d & 6d Cutting Length, Roughing and Finishing |
|
|||
Stainless Steel
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
B970 | 2 Flute Ballnose End Mill | 0.10-3.00mm | Z2, 2d, 4d & 6d Cutting Length, Roughing and Finishing |
|
|||
|
B972 | 4 Flute Ballnose End Mill | 0.10-3.00mm | Z4, 2d, 4d & 6d Cutting Length, Roughing and Finishing |
|
|||
Cast Iron
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
B970 | 2 Flute Ballnose End Mill | 0.10-3.00mm | Z2, 2d, 4d & 6d Cutting Length, Roughing and Finishing |
|
|||
|
B972 | 4 Flute Ballnose End Mill | 0.10-3.00mm | Z4, 2d, 4d & 6d Cutting Length, Roughing and Finishing |
|
|||
Non-Ferrous Material
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
B970 | 2 Flute Ballnose End Mill | 0.10-3.00mm | Z2, 2d, 4d & 6d Cutting Length, Roughing and Finishing |
|
|||
|
B972 | 4 Flute Ballnose End Mill | 0.10-3.00mm | Z4, 2d, 4d & 6d Cutting Length, Roughing and Finishing |
|
|||
Ballnose with Long Approach
| Product | Article | Description | Dia Range | Download PDF | ||||
|---|---|---|---|---|---|---|---|---|
 |
B8751 | 2 Flute Ballnose Endmill | 0.50-20.00mm | |
||||
 |
B9741 | 4 Flute Ballnose Endmill | 1.00-20.00mm | |
||||
Ballnose with Taper
Steel
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
 |
B9531 | 2 Flute Tapered Ballnose Endmill | 0.60-4.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
 |
B9521 | 4 Flute Tapered Ballnose Endmill | 0.60-2.50mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
Stainless Steel
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
B9531 | 2 Flute Tapered Ballnose Endmill | 0.60-4.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
|
B9521 | 4 Flute Tapered Ballnose Endmill | 0.60-2.50mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
Cast Iron
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
B9531 | 2 Flute Tapered Ballnose Endmill | 0.60-4.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
|
B9521 | 4 Flute Tapered Ballnose Endmill | 0.60-2.50mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
Non-Ferrous Material
| Product | Article | Description | Dia Range | Brief | Download PDF | |||
|---|---|---|---|---|---|---|---|---|
|
B9531 | 2 Flute Tapered Ballnose Endmill | 0.60-4.00mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
|
B9521 | 4 Flute Tapered Ballnose Endmill | 0.60-2.50mm | Z2, Defined Tapered milling, Roughing and finishing |
|
|||
Engraving
| Product | Article | Description | Dia Range | Brief | Download PDF |
|---|---|---|---|---|---|
 |
G847 | Solid Carbide Engraver | 0.05-0.20mm | For precision engraving | |
